1. The flap disc machine has a V-shaped worktable, which effectively guarantees the stability of the cylindrical product during turning.
2. Electromagnetic brake motor, if there is a power failure during the turning process, the machine will automatically lock and stop rotating, and there will be no reverse rotation.
3. The flip angle of the product can be adjusted slightly less than 90 degrees to effectively prevent the product from tipping over.
4. It has multiple limit protections and safety guarantees. It is equipped with mechanical limit devices. If the electronic control fails, it can also ensure the absolute safety of the machine and the operator. And the device has an overweight limit function.
5. There are double-row sleeve roller chains and all bearings, all of which are produced by well-known professional manufacturers in China. The sprocket is mechanically driven, and the chain tension can be adjusted at both points.
6. The turning machine has four load-bearing roller mechanisms that can adjust the spacing according to the actual use to ensure the level of operation. The vertical roll can be turned into a horizontal roll, or the horizontal roll can be turned into a roll, working in cycles.
7. The turning machine is easy to operate
(1) Turn on the power supply.
(2) Turn on the power switch and emergency stop button.
(3) Put the product to be turned over on the flap disc machine.
(4) Operate the "flip" switch or the wireless remote control switch (optional), the machine starts to work automatically: the flip body runs.
(5) After the flip is completed, the work ends and it stops automatically.
(6) The operator manually presses the travel switch, the plate on the guide rail is smooth and separated from the rolled plate, and the rolled plate can be reset after changing the rolled plate.