The flap disc machine is a kind of unloading device commonly used in the production of many industries. It is only necessary to put under the turning plate on the unloading device to realize automatic unloading, which is very convenient. This product is widely used in grain, oil, food, coal, What kind of attention should be paid to the use of building materials and chemical industries?
1. Vehicles should be used in a covered site during normal parking and loading and unloading of goods. If you need to park temporarily, load and unload goods in the open field. When it rains, stop the operation and cover the electrical control box with tape. Avoid the risk of electric shock when the electrical appliance is suddenly cut off due to rain.
2. Reverse the vehicle to the designated position according to the guide line of the unloading platform, raise the wheel stopper to a higher position, and the vehicle slowly reverses backward, and the tires can support the wheel stopper. The vehicle should tighten the handbrake and make sure that there is no driver's cab when unloading. people.
3. When loading and unloading goods, no load is allowed. Workers are not allowed to mix goods. Stand on the ground and operate the lift button to control the lifting and lowering of the passage. Assuming that the workers and goods are mixed, or the working passage is raised, no protective measures will be set up. Personnel stand at the bottom of the channel and work, if an accident occurs, they are responsible for the consequences.
4. The source line must not be moved to the ground at will to avoid pedestrian trampling and vehicle crushing. The power line should walk overhead and also have a grounding line connection. The power supply used should have a leakage protection switch before it can be used. If electrical failure occurs during use, it needs to be overhauled. When the power supply is blocked, maintenance work can be carried out.
5. The boot check shows whether there is an abnormal alarm, whether the height of the oil cylinder is 0, and whether the buttons of the wireless handle are normal.